How to Setup Wireless-N Repeater at Home?

Wireless-N Repeater is a network device that increases the strength and quality of the WiFi signals. If there is a long distance between your computer and the root router, it weakens the strength of the network. But by using a Wireless-N repeater, you can improve the strength of the signal over long distance.

In today’s article, you learn how to setup and log in to your repeater at home.

Steps to Setup Wireless-N Repeater

Here, you are looking for the best Wireless-N WiFi Repeater Setup process, steps are:

 

1. Firstly, turn off your router, and place your repeater near the router
2. After that, turn on your router and after few seconds turn on repeater
3. When the LED lights of your repeater are stable, then connect your computer or mobile device to the network of the repeater
4. You find the default network name (SSID) on the sticker that is pasted on the repeater
5. Launch a web browser on your device like Chrome, Microsoft Edge safari, etc.
6. Now, Type URL  myrepeater.net or 192.168.10.1 into the address bar of the browser
7. A login page will open, enter the username and password

(Fill “admin” into both fields )

1. Click on the Continue button
2. Here, the dashboard window is open on your device
3. On the dashboard, click on Setup Wizard > Wireless Repeater Mode > Repeater-One Key Settings
4. Choose the network of the root router that you want to extend
5. Then, click on the next button
6. Fill the password into the “Pre Shared Key” field
7. Now, click on the apply and reboot button
8. Wait for a reboot of the Repeater
9. When the Repeater is rebooted, You can complete the setup of your repeater

Following these steps, you can easily perform the myrepeater or 192.168.10.1 WiFi Repeater Setup process.

Setup Via WPS

You can use another way to set up your Wireless-N  Repeater. In this way, set up the repeater by using the WPS button. Let’s start:

1. Place your repeater and the root router together
2. Turn off the root router
3. Now, turn on the wifi repeater and the router
4. Firstly, press the WPS button of the repeater and within 2 minutes press the WPS button of the Router
5. It takes a few seconds for automatic pairing
6. When the pairing is complete, the repeater is successfully connected to the root router

The steps to set up your repeater via the WPS button are above.

Change Login Details

Username and password help to access the interface of Wireless-N WiFi Repeater. But you can also change the myrepeater.net login details. Here, we learn how to change the username and password.

Change Admin Detail

To change the admin details, follow the steps:

1. Connect your device to the repeater’s network
2. Open any web browser and enter the URL myrepeater.net or 192.168.10.1 into the search bar
3. Enter your default login detail and click on the login button
4. The interface dashboard will be open
5. When the interface is open, click on the settings option
6. Now, open the admin window, here you find a username and password option
7. To change details, click on the edit button
8. Enter your strong password and click on the apply button
9. Your password will be changed successfully

Change WiFi Name and Password

Follow the below steps to change the WiFi name and password:

1. Open an interface dashboard and find a wireless option
2. Click on it and select the WiFi settings
3. Now, click on the SSID or Network name field
4. Enter your new SSID and password and click on the apply button

This is how you can change your network name and password.

Conclusion

By following these steps carefully, you can set up your Wireless-N WiFi Repeater and change your admin or user credential.