The Linksys Velop is a
latest technology to connect with the internet. Linksys Velop advanced
technology uses dual and tri-band. It eliminates the need to use the multiple
networking devices at home like extenders and repeaters. This device is
compatible with iOS, Android and Windows. It has some amazing features like parental controls, guest network, and security. As per your
requirement you can customize these features.
Linksys router setup is pretty simple that
been done via myrouter.local URL as well
as for extender via extender.linksys.com.
Step-by-step guide to setup your new Linksys Velop mesh system is mentioned
below:
1. First, you have to switch off the power to your modem.
2. Then, unplug and remove your old router (if you have connected one) from the
modem.
3. For Linksys Velop Setup, it has
its own app which is “Linksys app”. Download the app from play store or app
store.
4. Now, open the app and create an account. (Log in to the app, if you already
have an account).
5. Connect the Ethernet cable from your modem to router (primary node).
Connect one end of cable to LAN port of the
modem and other end to WAN port of the Velop router.
6. Afterwards, power on the Node. Wait for the LED to start blinking blue,
which means node is ready to be setup.
7. Now again, open a Linksys app and click on “setup a new product”.
8. You have to select a “Velop” from the list.
9. Follow the instructions and connect your phone to the main node and
configure the WiFi network name (SSID) and password. Your credentials are
written on user manual, and you can customize SSID and password.
10. Then, to connect child nodes to parent node, you must power them on in
different locations in your home.
11. Once all the nodes are added, Linksys app will confirm the setup.
12. At last, you can run a speed test and check the connectivity area in your
home.
NOTE: Keep checking firmware updates regularly in the app to ensure your
network remains secure and efficient.
If you want to connect a Linksys extender
device as well, but you should configure it, like Linksys
RE6300 setup.
Mostly, there are problems faced by first
time users during Linksys Velop setup process
Troubleshooting Tips of Linksys Velop Setup
There are some tips you can consider while setting up:
1. Not Connecting Node:
> Ensure that your node is plugged in a wall socket
and the LED is blinking blue.
> Unplug the power adapter and now wait for few seconds before you plug in
the adapter on a wall socket.
> Make sure child nodes and main node is within the range during the process
of setup.
2. Linksys App Error:
> Your mobile phone should be connected to the main
node network.
> Make sure your phone have latest version of Linksys app installed.
> Sometimes even a simple restart of your mobile can help.
3. Velop Showing Red Color:
> Solid Red: It indicates a problem. Check your
internet connection or try rebooting the node.
4. Issue Connecting with Internet:
> Check that your modem works properly and connected to the internet.
> If you are using a wired connectivity,
make sure Ethernet cable is connected to both modem and the main node.
Sometimes reconnecting it resolves the problem.
5. Failed to Add a Node
> Make sure the additional node is
within range of the main node. And if it’s not, then move it bit closer to
additional node if it demands for connection.
> If a node fails to connect, try
resetting it by holding the reset button for about 10 seconds until the LED
blinks red.
Conclusion
This is a superb device to meet all your networking requirements at budget
friendly prices. It has amazing features which meets all your expectations. Above,
we have discussed the Linksys Velop setup and its troubleshooting tips.
